ULTRASONIC ASSISTED SYNTHESIS AND CHARACTERIZATION OF CHITOSAN GRAF WITH 2-(DIMETHYLAMINOETHYLMETHACRYLATE) (DMAEMA) Cs-g-PDMAEMA
DOI:
https://doi.org/10.47941/jps.650Abstract
Purpose: Many researchers reported the use of chitosan in various applications due to its desirable properties, but then its application in a certain condition is limited due to its lower mechanical stability, lower solubility in certain solvents, and crystallinity of the polymer. Numerous report has been published by many researchers across the world modifying chitosan to enhanced its properties thereby improving its application in various field
Methodology: Poly (2-dimethylaminoethyl methacrylate) (Cs-g-PDMAEMA) were successfully synthesized by Ultrasonic methods for the first time. The synthetic method was optimized by varying various reaction parameters and reaction conditions. The grafting was confirmed by characterizing the copolymer with FTIR, XRD, XPS, SEM, TGA, DTG, and DTA.
Findings: The results show a good percent grafting and percent yield up to 132%G and 94.7%Y at optimum condition, and also shows a decrease of thermal stability and crystallinity of chitosan, there was improved in porosity of the surface, and complexity of the surface functional group making it a good candidate for metal chelating. Observing various changes in the spectrum of these derivatives and that of pure chitosan in addition to the change in properties of these polymers such as surface morphology, thermal stability, and crystallinity.
Uniqe Contribution to Theory, Practice and Policy: It was suggested that this modification may improve the application of these polymers.
KeyWords: Chitosan, Cs-g-PDMAEMA, Ultrasonication, Grafting
Downloads
References
Abd El-Salam, H. M., Kamal, E. H. M., & Ibrahim, M. S. (2017). Synthesis and Characterization of Chitosan-Grafted-Poly(2-Hydroxyaniline) Microstructures for Water Decontamination. Journal of Polymers and the Environment, 25(4), 973–982. https://doi.org/10.1007/s10924016-0847-7
El-Arnaouty, M. B., Eid, M., Abdel Ghaffar, A. M., & Y. Abd El-Wahab, S. (2020). Electrical Conductivity of Chitosan/Dimethyl Amino Ethyl Methacrylate/Metal Composite Prepared by Gamma Radiation. Polymer Science - Series A, 62(6), 714–721. https://doi.org/10.1134/S0965545X20060012
Islas, L., Burillo, G., & Ortega, A. (2018). Graft Copolymerization of 2-Hydroxyethyl Methacrylate onto Chitosan Using Radiation Technique for Release of Diclofenac.
Macromolecular Research, 26(8), 690–695. https://doi.org/10.1007/s13233-018-6100-6
Kong, P., Feng, H., Chen, N., Lu, Y., Li, S., & Wang, P. (2019). Polyaniline/chitosan as a corrosion inhibitor for mild steel in acidic medium. RSC Advances, 9(16), 9211–9217. https://doi.org/10.1039/c9ra00029a
Mohd, W., Mustaqim, E., Daniyal, M., Fen, Y. W., Saleviter, S., & Chanlek, N. (2021). X-ray Photoelectron Spectroscopy Analysis of Chitosan – Graphene Oxide-Based Composite Thin Films for Potential Optical Sensing Applications.
Thankamony, R. L., Li, X., Fan, X., Sheng, G., Wang, X., Sun, S., … Lai, Z. (2018). Preparation of Highly Porous Polymer Membranes with Hierarchical Porous Structures via Spinodal Decomposition of Mixed Solvents with UCST Phase Behavior [Research-article]. ACS Applied Materials and Interfaces, 10(50), 44041–44049. https://doi.org/10.1021/acsami.8b16120
Torabi, M., Drahansky, M., Paridah, M. ., Moradbak, A., Mohamed, A. ., Owolabi, F.
abdulwahab taiwo, … Abdul Khalid, S. H. . (2016). We are IntechOpen , the world ’ s leading publisher of Open Access books Built by scientists , for scientists TOP 1 %. Intech, i(tourism), 13. https://doi.org/http://dx.doi.org/10.5772/57353
Wang, W., Meng, Q., Li, Q., Liu, J., Zhou, M., Jin, Z., & Zhao, K. (2020). Chitosan derivatives and their application in biomedicine. International Journal of Molecular Sciences, 21(2). https://doi.org/10.3390/ijms21020487
Yin, J., Wahid, F., Zhang, Q., Tao, Y., & Zhong, C. (2017). Facile Incorporation of Silver Nanoparticles into Quaternized Poly ( 2- ( Dimethylamino ) Ethyl Methacrylate ) Brushes as Bifunctional Antibacterial Coatings. (March). https://doi.org/10.1002/mame.201700069
Ziegler-Borowska, M., Chełminiak, D., & Kaczmarek, H. (2015). Thermal stability of magnetic nanoparticles coated by blends of modified chitosan and poly(quaternary ammonium) salt.
Journal of Thermal Analysis and Calorimetry, 119(1), 499–506. https://doi.org/10.1007/s10973-014-4122-7
Downloads
Published
How to Cite
Issue
Section
License
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution (CC-BY) 4.0 License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
